Step 5 The DPR chip will be set to ID 1 by default.

The DPR should fit quite freely in to the cavity without undue pressure.

Step 4 Check to ensure that the wire are not obstructing the fitting of the DPR chip and ease the wires and the DPR chip into the cavity. On this example (see picture), the red wire on the plug is situated nearest the round metal transistor on the DPR chip. Take care as the plug only fits one way round. Step 3 Plug the DPR chip in to the DPR socket on the car. This will leave room for the plug/socket to fit in the front section and, importantly, a cavity for the round metal transistor on the DPR plug to fit in the 'V' shaped area immediately in front of the fixing screw. The very best in Scalextric cars, parts and track from the 1960s through to the present day. Step 2 With care, relocate the wires so that the hold the brown capacitor and the black ferrite choke are moved into the cavity in front of the steering wheel. As you will see, it is not possible to simply put the DPR plug straight in to the chassis due to the wires within the nose of the car obstructing the DPR chip. Step 1 Unscrew the blank DPR plate and disconnect it from the plug on the wiring loom. All the preparation can be done from the DPR module door. It is not necessary to remove the body from the chassis. Fitting an F1 DPR Digital Chip in to an F1 car is simple enough but does require some preparation of the wires already inside the car. Retro-fitting service If you are unable to retro-fit a chip to a car yourself, your local Scalextric retailer may offer a digital chipping service.

This is normally on the centre line of the car chassis. Additionally, the sensor should also be placed in the chassis so that it is immediately above the track slot. Digital Chip - Retro Fit Location When retro fitting a Digital chip to a Scalextric car ensure that the chip is positioned as close behind the guide blade as possible.įitting the sensor chip close to the guide blade ensures the correct distance between guide blade and lane change flipper. The operation of fitting a digital chip takes no longer than 60 seconds and requires only a small flat head screwdriver - DONE IN 60 SECONDS! This feature means that you can purchase any car from the Scalextric range knowing that it will work perfectly well as a standard car, but can be upgraded to Digital in the future.

DPR cars will not work on a Scalextric Digital circuit without first being fitted with a Digital chip such C8515, C8516 or a retro-fit chip.

DPR cars have the ability to be easily converted for use on Scalextric Digital circuits by fitting a Digital chip.

Nearly all of our new cars are made with a standard feature called Digital Plug Ready (DPR) - a plug accessed via the floor pan of the car.

The wealthy lancer rapidshare serbia